When it comes to home wifi routers, Eero is a top pick. To eliminate dead zones and ensure that all of the devices have sufficient bandwidth, eero is a great investment. It’s possible to install as many eeros as you’d want in any room of the home, allowing for complete customization or expansion. And to connect everything, you must switch the gadget to bridge mode.
How can I switch Eero to bridge mode, then? Eero’s Wifi-settings System’s page makes it simple to accomplish just that. In addition to the above, there are certain preliminary actions you must do at this site. Learn how to correctly set up Eero as a bridge by reading our full article.
What Is Bridge Mode?
Because of this, when a router is set to Bridge mode, the routing function (the NAT feature) is effectively turned off. An interconnection between two routers in a network. Using the bridge mode on your routers will enable them to work together without interfering with any other network traffic. When the router’s bridge mode is turned on, the expanded router becomes part of a mesh network.
When activated, the connected router functions more like a switch. With bridge mode enabled, your router will keep transporting data but it will no longer perform standard NAT translations.
And after turning off NAT, your network may act as a DHCP server with no IP address conflicts thanks to the bridge. So, you’ve noticed that each router has a unique individual IP address. That’s why it’s important to use the same router for all of your devices, or else they might not be allowed to speak to each other. Double NAT is the term for this situation.
Allow me to elaborate a little bit. Consider a scenario in which both your smartphone and your printer are linked to your router/modem through an extension. Because of this, you can no longer use your phone as a wireless printer in this location. In this case, bridge mode will come in handy. With this setup, many wireless routers may connect to and use the same wireless network.
Should I Put My Eero In Bridge Mode?
We advise setting up your modem/router combination as a bridge if you use it to connect to the internet. The same principle holds true for Eero. As a replacement for your current router, Eero is a Wi-Fi system designed to improve Internet connectivity and stability across your house.
When an Eero is set to bridge mode, network services are turned off but WiFi service is still provided. In addition, bridge mode requires a continuous Ethernet connection from a single eero to the network.
In eero pro bridge mode, the device’s WiFi is disabled and its Internet connection is redirected to your eero router. This step is necessary to enable all of Eero’s advanced features.
Keep in mind that some of your Eero’s more complex functions, including the ability to create a separate profile for each member of the family, may also be disabled.
How To Setup Eero In Bridge Mode – Step By Step Guide
Make sure your eero network is ready before you switch your modem/router to bridge mode. After that is complete and the network is live, proceed as follows to know how to set up eero in bridge mode:
- Get out your phone where the Eero app is currently installed.
- The app’s navigation menu consists of three lines in the top right. Select that alternative by pressing the button.
- Many other possibilities will present themselves to you. Network infrastructure should be the fourth option. Go with that alternative.
- To access the more complex network options, go there.
- After making that selection, other alternatives will appear. If you want to use DHCP and NAT, you may do so by selecting those options from the menu.
- Three options will appear on the screen. There are three modes available: IP (Internet Protocol), Bridge, and Automatic. Select Bridge, of course.
- Currently, the Eero Network will automatically reboot. If not, you’ll have to carry it out by hand. Your current router will continue to handle all network operations when the device reboots, since it will remain in bridge mode.
Eero Slow In Bridge Mode – What To Do?
Eero Bridge mode shouldn’t cause any significant lag in the Eero network. If you want a better signal for your home Wi-Fi network, try this.
It’s possible that the issue stems from some faulty placement. To verify this, you should conduct a speed test from each room where you’ve installed an Eero. There are a variety of wifi speed checkers available online.
You can notice the difference in speed between the various Eero devices by comparing their transfer rates. If the internet speed on one of the devices is too low, try moving it to a different spot. You may also use this page to restart your modems or reconnect your Eero to your modem. However, if you’ve exhausted all other options, you may always contact Eero’s network support team.
When you need additional wireless coverage but are far from your wifi network, switching to eeros bridge mode might help. If you live in a two-story home with an attached garage, you will find the ability to bridge your Eero to be an invaluable convenience. You may now put Eero into bridge mode as well. Pay close attention to our instructions and then give it a go. For more info Please contact us anytime at dashboard.eero