It’s quite frustrating for us when our eero wireless communication is activated but no internet access is available. This data may be recorded through the router’s LED glow. You could be perplexed by the appearance of an eero that is flashing blue after a reset. Can I get away from it in any way? We’ll do our best to provide you with a guide that will help you understand.
The first mystery to be solved concerns the significance of the flashing blue light on eero. Provided that you’ll let us, we’ll explain this to you.
- If the rate at which the blue lights in your Eero router are flashing tells you that it is booting up, you should expect it to be up and running shortly. Once it’s online, it will flash a steady blue light in your face.
- When the Flashing Blue Light On Eero extremely slowly. Following this, the router will either be able to report whether or not it is connected to the internet, or its status light will become permanently solid blue.
- However, if you see the Eero router in front of you flashing both blue and red lights, something is wrong. As a result, remember that your router doesn’t need to be turned off while the firmware update is in progress.
Ways to Fix Flashing Blue Light On Eero Issue
Fortunately, there are very few simple solutions to the problem of eero flashing blue light. When fixing anything, you need to make sure you’re confident in the measures you’re doing.
Do not hesitate to get in touch with eero’s technical assistance if you have any questions or concerns about the setup procedure. If the blue light on your eero keeps flashing, consider one of these simple solutions. If you want the whole version of the instructions below, go over to the eero tutorial.
Check the Ethernet cables in your computer
It is not a terrible idea to attempt the following even if you are certain that nothing has tampered with your cabling configuration. Reconnect all of the network cables which are currently connected to your eero as well as other devices, such as a fiber router and network hub or switch.
An unstable connection between your eero and the rest of your system might occur if even a single pin on your Ethernet cable isn’t properly connected. To reconnect your eero Ethernet cable, push in the retaining clip, take the cable out until the Ethernet connecting light turns out, then plug it back inside and press it in until you hear the click.
If it doesn’t click in, or the retaining clip is torn off, then you need to replace the Ethernet cable and see if it helps to resolve the issue of Flashing Blue Light On Eero.
Is Your ISP Experiencing Problems Upstream?
We feel your suffering if you have ever spent a long time attempting to repair a faulty internet connection, only for service interrupted while you were trying to do so. Also, if you have issues such as eero flashing blue color light then check for upstream problems.
If you are having trouble connecting to the internet, calling your Internet service provider (ISP) is a smart option. If so, you may inquire as to when regular service is expected to be restored.
Power down your eero and then power it back up.
One may argue that this is one of the ancient (and most reliable) techniques available. In the event that your eeo’s networking services are malfunctioning for no apparent reason, a simple power cycle may be all that’s required to get everything back up and running.
Restarting the services your eero relies on to provide you with wifi and internet coverage helps it to clear off any temporary files and get back to providing you with the best possible service.
To reset your eero, unplug the power cord from the rear of your device, wait a few minutes until the LEDs have all turned off, and then connect the wire back in. This will help you resolve if your eero is blinking blue.
Try out the App
Sometimes a network reset is the best medicine, and the eero application on your phone is all you need to do one.
If you are reading this, we assume you have access to the internet, so now would be a good time to set it up if you haven’t already.
How to Factory Default Your Eero:
- Activate the eero application on your smartphone or tablet..
- Select the “Settings” menu.
- Locate the menu labeled “Advanced” and click it open.
- Select the Reset button.
- Choose to Restart the Network.
- Confirm
During this time, you will experience a temporary loss of connectivity; however, you should be back online within a few minutes.
Conclusion
Flashing Blue Light On Eero flickering problem has been fixed, and the network performance has been enhanced. At this time, you should see a solid blue light flashing ahead of you, letting you know that there is no need to take any more action.
Constant or no blinking indicates a possible network issue that should be discussed with a customer service professional at dashboard.eero. They’ll give your router a complete examination, and if any problems are found, they’ll give you a whole new one.
